ACRtec Surface Accelerating Agent
ACRtec Surface Accelerating Agent is an acetic based solution designed to be used on existing concrete and in combination with Alchemco’s TechCrete 2500, CretePRO and BridgeDECK products. ACRtec Surface Accelerating Agent increases the effectiveness of these products to seal small cracks and voids in the concrete. This product should only be used in combination with these products on concrete surfaces. Do not use for general applications.
Key Benefits
Increases the calcium content of the concrete
Enhances the sealing of cracks on initial application and will help to seal future cracks.
Non-toxic
Physical Properties
Slight acetic odor
Non-toxic & Biodegradable
Percent non-volatile solids: 7.5%
Flash point - no true flash - boils at 214 °F (101 °C)
Auto-ignition temperature - N/A Non-explosive
Viscosity: 890
Hazardous chemicals: None
pH 6.3-9.6
Application Rates
Coverage rate:
Coverage rate: 900 - 1,000 ft² / 5 gallon pail
84 - 93 m² / 19 liter pail
Packaging: 5 gallon pail / 19 liter pail
ACRtec Surface Accelerating Agent™
Designed to Work with ETT-Based Systems
With a single application, ETT remains within the concrete matrix — delivering protection from within for the life of the concrete.
ETT penetrates into cured concrete and, when activated with water, develops an insoluble gel within the concrete itself—forming a subsurface membrane that helps protect against water and chemical intrusion for the long term.
Works Within The Concrete
Unlike surface-applied coatings, ETT becomes part of the concrete, helping protect from within.
Spray Applied.
Long-Term Protection.
Fast, practical application with protection designed to remain
inside the concrete.
VOC Free $ Non-Toxic
responsible solution for projects that demand durability and safer chemistry.
Sustainable Performance
A responsible solution for projects that demand durability and safer chemistry.