CretePro Ultra Waterproofing Agent
CretePro Ultra Waterproofing Agent must be applied to a clean, dry, dust-free concrete surface, at least 28 days old. If the surface is not clean, then the use of one of the following Alchemco Clean & Repair (ACR) products, or a shot blast system, is suggested for prepping the surface for warrantied applications. Chemical cleaning may require multiple applications and the use of different products to achieve complete cleaning. Certain types of cleaning equipment may improve performance and speed of application when applying chemical cleaners, contact the Technical Department for a list of approved equipment and cleaning methods.
• ACR Concrete & Masonry Cleaner • ACR Emulsifying Cleaner
• ACR Concrete & Masonry Etch • ACR Paint & Stain Remover
• ACR Rust Converter & Inhibitor
Contact the Technical Department for help and directions for which cleaning product will provide the best result for a clean surface.
Where segregation or voids are apparent, chip out and treat with ACR Concrete Patch & Repair. Once repaired, allow at least 24 hours for patches to dry and cure. If works needs to be completed faster, then use ACR HP Concrete Repair.
Do not apply where ambient temperatures are below +39°F (+4°C) or above +95°F (+35°C). Do not apply within 24 hours of the surface being wet.